50' LOGGERS TAPE
Combination: feet, inches, 8ths, one side, 120" diameter
inches, 10ths, other side.
use in the most rugged conditions! Yellow enamel line, black
graduations, black and red numbers, heavy-duty case, hardened
steel gears and fast automatic rewind. All tapes sold without
nail (order separately).
TAPE NAIL FOR SPENCER LOGGERS TAPE
- button top with screw
- requires hinge for attachment
REPLACEMENT TAPE FOR SPENCER 50'
LOG TAPE REPLACEMENT END-LOOP END with 12' of blank tape attached with rivets
Pocket DIAMETER TAPE - 10'
in inches and 10ths one side, 120" Linear in inches and
16ths (first 12" in 32nds) other side. 1/4" x 10´
Yellow line steel tape has black markings. ABS case. Spring rewind.
Blade lock. Dimensions: 2-1/8" x 1-7/8".
HIP CHAIN Measuring device
with 1 roll of string
for preliminary surveying, stakeout, distance verification, sampling
grid layout, reconnaissance, timber cruising and mapping, mine
claim staking, and more!
Measures in feet. Just tie the line to a tree or other object and set the meter to zero. As you walk, the meter measures and indicates the length of line pulled out giving you the distance you've traveled. Your hands are free for other tasks. After use, simply break and discard the disposable line, reset the counter, and you're ready to measure again!
HIP CHAIN THREAD - Natural
HIP CHAIN THREAD - Orange
0 to 9,999. Fit comfortably in hand. Finger ring attached. Figures
reset to zero by turning one knob. Shiny, plated metal finish.
Meet U.S. Government Standards.
SILVA RANGER COMPASSES
compass dial with white graduations every 2°. Swedish steel
needle pivots on a liquid damped, sapphire jeweled bearing. Built-in
magnetic declination adjustment screw. Sighting mirror with luminous
points. Needle orienting arrow and lines. Clear protractor baseplate
has inch scale edge (graduated in 20ths), millimeter scale edge
and Romer Scales of 1:24,000, 1:25,000, and 1:50,000. Clinometer
reads to ±90°. 2-1/4" x 4" closed. Lanyard
and instructions included.
SUUNTO KB14 COMPASSES
impact and corrosion resistant aluminum housings are flat and
compact with no protruding or adjustable parts. Needle cards
are immersed in a clear, low-viscosity liquid damping for smooth,
vibration-free movement. Needle cards pivot on polished sapphire
bearing. Azimuth models have a small backsight and larger foresight,
both graduated to 1/2°; estimates to 1/4°. Quadrant models
are graduated in 1° units. Cotangent table printed on back.
Balanced for use in Northern hemisphere. Dimensions: 3"
x 2" x 9/16".
PRISMS: BAF10 with case
±1% of rated BAF. Gives a narrow-sharp image for good
results in dense timber. 20 mm x 40 mm. Supplied in leather case.